The tank is provided with in-out air valve connections and drain fitment arrangement .The tank is Hot Dip Galvanized or Powder Coated as desired.

• Mild steel construction.
• Coated with more than 70 micron thick deep blue colored epoxy powder from both inside and outside surface for protection against corrosion and weather effects.
• Turbulent inlet ensures thorough mixing of chemicals and / or fertilizers.
• Separate valves are provided on the inlet & outlet to control the injection rate.
• High pressure hose assembly inlet / outlet connection.
• Wide 8” opening for easy pouring of stock solution.
• Drain port to flush the tank.

Application

Fertilizer and chemical injection through drip and sprinkler irrigation systems.

Air Release Valve is used at high pressure areas where the flow needs to be controlled. It is highly appreciated for its efficient performance and durability. It allows air to escape when filling the pipe. It allows air to enter when emptying the pipe (preventing pipe collapse). Continuous automatic control, eliminating accumulated air, even when the system is under pressure. The Air release valve shall be capable of both releasing and admitting air from and into the line.

Advantages

• Environmental, high temperature resistant, not easy to deformation,
• High corrosion resistance and good sealing
• Releasing large volume of air from pipelines when filling;
• Preventing mud and debris or particle from sucking back into pipelines;
• Protecting irrigation systems and components;
• Removable top cap convenient for seal maintenance.
• Acts as vacuum breaker while drain off.
• Excellent chemical and weather resistance.
• Perfect pressure-balanced float dynamically removes even small air pockets.

Application

• Recommended in water supply distribution and long pipeline networks.
• Protects irrigation system and components.

SIFLON Venturi injector is used to inject water and their operation is extremely appreciated as it increases the irrigation efficiency and the yielding of crops. Ideally suited for persist mixing functions, need no secondary blending devices. We make this type of injector is available in market in a variety of dimensions and extensively demanded amongst our clients due to their high durability.

Features

• Delivers plant nutrients directly into the wetted zone (where root development is intensive)
• In-built check valve for protecting the injected liquid against back flow
• Can be used with a large variety of chemicals
• Uniform application of fertilizers
• Saves Energy and Manpower

Application

To Inject Fertilizers & Chemicals in Micro Irrigation System.

• 1/4 inch male threaded connection
• 0/100 psi/kPa pressure measurement
• 2-1/2 inch glycerin filled steel dial
• Nominal Sizes: 4”, 6”
• Case and bezel: 304 SS with screwed bezel
• Wetted Parts: 316 SS or 316 L SS
• Moment: 304 SS
• Diaphragm: 316 LSS or 316 LSS
• Flange: 316 SS or 316 LSS
• Pressure Range: up to 40 kg/cm2

Application:

Filtration, Water, Pharmaceuticals, Biotech, Food, Petrochemicals.

SIFLON Drip Irrigation provides attractive and strong plastic header assembly.

Features

• 1″ Threaded connection for air vents in single port.
• Double Pressure gauge ports with brass bushes.
• Support for assembly to maintain sturdiness.
• Made of glass reinforced engineering plastic which is much stronger than PP.
• Corrosion resistant which is a major problem with Head Units.
• Input Voltage: 400V to 560V (3 phase)
• Power consumption: 3w
• Material: CPVC, UPVC etc.