SIFLON Take off System is highly durable in nature and easy to use. These fittings are used while compiling the drip irrigation system. They are a great option for connecting low pressure irrigation tubing and drip lines to polyethylene tubes or PVC pipe. Use of capo rubber grommets and correct drill bit is necessary for leak-proof installation. Innovative design, with collapsible barb, prevents pull-out and reduces grommet damage during the installation process. Frequently used in agriculture, horticulture and vineyard applications.

Features:

• Resistance to corrosion
• Easy to install, saves time and money
• Fitting stays firmly in place when used with the Capo Grommet
• UV stabilized materials for long life

Tested under rigid conditions

Grommet is used to connect the lateral to Submain. A hole is punched with hand drill of predetermined size in Submain. Gromate is fixed into the hole. Take off is pressed into the hole. Take off is pressed into the gromate with take of punch up to the step provided. Gromate acts as a seal. The sizes are different for 12 mm, 16mm, and 20 mm lateral.

The Grommet is a polymer insert designed to fit in devices to provide a flexible friction interface between the device and a connector. This minimizes any unplanned movement and so optimizes the configuration.

The Grommet fits perfectly in any of the 12 &16mm attachment holes. Grommet is available in semi-standard and standard sizes and shapes. Owing to attributes like easy installation and durability, the offered series is extensively demanded in the market.

Injection molded, high grade polymer for extreme resistance to tearing and abrasion

High levels of friction and holding power

Applications

Agriculture & Automobile industries

The Drip Joiner is used while connecting pipes in a system to ensure leak proof supply of water in drip irrigation system. Designed by using finest quality material, these joiners are available in different sizes and dimensions.

Features

• Low maintenance
• Durable
• Leak proof

Available Sizes: 12/16/ MM

SIFLON providing a supreme quality gamut of Drip End Cap are approved spectrum of 12 & 16mm Drip Lateral End Cap. They are used to close the lateral ends, Submain ends or mainline ends. Sub mains and mains are preferably provided with flush valve. They are convenient for flushing the line.

Features:

• Lightweight
• Immaculate finish
• Simple design
• High efficiency
• Enhanced durability
• Crack resistance
• Elevated durability

Available Sizes: 12/16/ MM

• Compact Double Union (DU) design.
• Manufactured from high performance rigid PVC compound.
• Designed for added safety. Accidental loosening of the ball is prevented.
• Chemical resistant nitrile rubber-O-rings ensures leak proof operation for longer period.
• Easy to install and dismantle.
• Constructed of highly durable UV and chemical-resistant materials to assure long life
• Solvent weld, BSP threaded or flanged options.
• Available in two seat ring options – economical HDPE seat ring for low pressure applications or leak resistance Teflon (PTFE) seat ring for high pressure applications.

Application

Ideal way to control water flow to individual plants and planting containers & water supply lines.

The flush valve is used in the fitting of a flush system for passing the waste through the drain pipe.

• Manufactured from high performance rigid UPVC & PP compound.
• Excellent chemical and corrosion resistance.
• Precise flow control possible.
• Maximum operating pressure 8 kg/cm².
• Available in 40, 50, 63, 75 and 90 mm sizes.
• Light weight
• Immaculate finish
• Durable finish standards

Application

Suitable for flushing the entire drip irrigation system & water supply line.

Recommended in micro/ drip irrigation as a flush valve to remove the entrapped dirt from pipe line during flushing.

SIFLON is instrumental in supreme quality Micro Irrigation Tubes. The tube is manufactured using top class material and modular technology in compliance with set industrial norms. It is used as feeders in green house drip irrigation systems. Micro tubes are small-bore polyethylene tubes, which can be pierced along laterals to provide simpler passages and thus less susceptibility to clogging.

• Micro Tube is a drip line with very small hole diameter – 6 mm
• Micro Tube can be inserted in plain drip line after making a small hole for inserting the micro tube.
• It can work well under gravity irrigation. Hence can be used along with drum kit, home garden kit.
• For terrace garden with grow bags, micro tube is used extensively.
• Micro Tube can be inserted into cylindrical drip tube for tree irrigation.

Application

• Suitable for The over water pipeline of micro sprinkler, spray irrigation and other micro spray products.
• Perfect for gardens, balconies, hanging baskets, greenhouses, vegetable gardens, potted plants, etc.

Barbed tubing coupler is used to connect two pieces of low pressure poly tubing of the same size. SIFLON barbed fittings provide high retention in low-pressure poly tubing for long-term reliability of connections. These fittings can be confidently installed without clamps when matched with our quality low-pressure poly tubing with corresponding dimensions.

Features:

• Sharp-edged barbs create leak-proof seal
• Increased strength and superior quality
• Heat, chemical and wear-resistant
• UV stabilized materials for long life